Pages

Sunday, September 22, 2019

Fedora 30 : Detect hardware issues.

You can detect your hardware and read the health of your system using many commands and tools.
Today I show you these tools: lm_sensors-sensord.x86_64 and lshw.
[root@desk mythcat]# dnf install lm_sensors-sensord.x86_64 
...
Installed:
  lm_sensors-sensord-3.5.0-6.fc30.x86_64       rrdtool-1.7.2-1.fc30.x86_64      
  libdbi-0.9.0-13.fc30.x86_64                 

Complete!
...
[root@desk mythcat]# dnf install lshw
Last metadata expiration check: 0:50:16 ago on Sun 22 Sep 2019 10:27:55 PM EEST.
Dependencies resolved.
================================================================================
 Package       Architecture    Version                   Repository        Size
================================================================================
Installing:
 lshw          x86_64          B.02.18-21.fc30           updates          315 k

Transaction Summary
================================================================================
Install  1 Package

Total download size: 315 k
Installed size: 1.1 M
Is this ok [y/N]: y
Downloading Packages:
lshw-B.02.18-21.fc30.x86_64.rpm                 598 kB/s | 315 kB     00:00    
--------------------------------------------------------------------------------
Total                                            56 kB/s | 315 kB     00:05     
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction
  Preparing        :                                                        1/1 
  Installing       : lshw-B.02.18-21.fc30.x86_64                            1/1 
  Running scriptlet: lshw-B.02.18-21.fc30.x86_64                            1/1 
  Verifying        : lshw-B.02.18-21.fc30.x86_64                            1/1 

Installed:
  lshw-B.02.18-21.fc30.x86_64                                                   

Complete!
First, use this command to select and setup the sensors:
[root@desk mythcat]# sensors-detect
# sensors-detect revision $Revision$
# System: Gigabyte Technology Co., Ltd. Z68P-DS3
# Kernel: 5.2.13-200.fc30.x86_64 x86_64
# Processor: Intel(R) Celeron(R) CPU G1620 @ 2.70GHz (6/58/9)

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): YES
...

Driver `coretemp':
  * Chip `Intel digital thermal sensor' (confidence: 9)

Driver `it87':
  * ISA bus, address 0x290
    Chip `ITE IT8728F Super IO Sensors' (confidence: 9)

Do you want to overwrite /etc/sysconfig/lm_sensors? (YES/no): YES
Unloading i2c-dev... OK
The output of sensors can be show like this:
[root@desk mythcat]# sensors
it8728-isa-0290
Adapter: ISA adapter
in0:          +1.04 V  (min =  +0.00 V, max =  +3.06 V)
in1:          +2.00 V  (min =  +0.00 V, max =  +3.06 V)
in2:          +2.98 V  (min =  +0.00 V, max =  +3.06 V)
in3:          +2.96 V  (min =  +0.00 V, max =  +3.06 V)
in4:          +0.00 V  (min =  +0.00 V, max =  +3.06 V)  ALARM
in5:          +0.70 V  (min =  +0.00 V, max =  +3.06 V)
in6:          +1.52 V  (min =  +0.00 V, max =  +3.06 V)
3VSB:         +3.38 V  (min =  +0.00 V, max =  +6.12 V)
Vbat:         +3.00 V  
fan1:        1180 RPM  (min =    0 RPM)
fan2:           0 RPM  (min =    0 RPM)
fan3:           0 RPM  (min =    0 RPM)
fan4:           0 RPM  (min =    0 RPM)
temp1:        +37.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp2:        +25.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp3:        +25.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = Intel PECI
intrusion0:  ALARM

nouveau-pci-0500
Adapter: PCI adapter
GPU core:     +0.90 V  (min =  +0.85 V, max =  +1.00 V)
temp1:        +42.0°C  (high = +95.0°C, hyst =  +3.0°C)
                       (crit = +105.0°C, hyst =  +5.0°C)
                       (emerg = +135.0°C, hyst =  +5.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +37.0°C  (high = +85.0°C, crit = +105.0°C)
Core 0:        +36.0°C  (high = +85.0°C, crit = +105.0°C)
Core 1:        +37.0°C  (high = +85.0°C, crit = +105.0°C)
Using the lshw tool:
[root@desk mythcat]# lshw
desk                        
    description: Desktop Computer
...
The tool extracts detailed information on the hardware configuration of the machine and output is shown like HTML, JSON or SQLite database, see the help:
       lshw [ -version ]

       lshw [ -help ]

       lshw [ -X ]

       lshw [  [ -html ]  [ -short ]  [ -xml ]  [ -json ]  [ -businfo ]  ]  [ -dump filename ]  [
       -class class... ]  [ -disable test... ]  [ -enable test... ]  [ -sanitize ]  [ -numeric  ]
       [ -quiet ]