Fedora 33 : Upgrade from Fedora 32.

It is recommended to put SElinux in the disabled ... Use the following commands for this operation Edit the /etc/selinux/config file, run:

sudo vi /etc/selinux/config

Set SELINUX to disabled:

SELINUX=disabled

These commands will prepare the Fedora 32 for update

[root@desk mythcat]# dnf config-manager --set-disabled "*"
[root@desk mythcat]# dnf repolist 
[root@desk mythcat]# dnf config-manager --set-enabled updates
[root@desk mythcat]# dnf repolist 
repo id                                       repo name
fedora                                        Fedora 32 - x86_64
updates                                       Fedora 32 - x86_64 - Updates
[root@desk mythcat]# dnf upgrade --refresh
...
[root@desk mythcat]# dnf install dnf-plugin-system-upgrade
...

Let's upgrade with new Fedora 33 packages:

[root@desk mythcat]# dnf system-upgrade download --releasever=33 --allowerasing
Before you continue ensure that your system is fully upgraded by running "dnf --refresh upgrade". 
Do you want to continue [y/N]: y
...
  file /usr/bin/ocamlprof.byte conflicts between attempted installs of ocaml-4.11.1-1.fc33.i686 
  and ocaml-4.11.1-1.fc33.x86_64
...
[root@desk mythcat]# dnf remove ocaml
...

I try again to update:

[root@desk mythcat]# dnf system-upgrade download --releasever=33 --allowerasing
...
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Complete!
Download complete! Use 'dnf system-upgrade reboot' to start the upgrade.
To remove cached metadata and transaction use 'dnf system-upgrade clean'
The downloaded packages were saved in cache until the next successful transaction.
You can remove cached packages by executing 'dnf clean packages'.

[root@desk mythcat]# dnf system-upgrade reboot

After reboot and system upgrade the new Fedora 33 is ready to use.
If exist another upgrade then use dnf tool command:

[sudo] password for mythcat: 
[root@desk mythcat]# dnf upgrade
Last metadata expiration check: 1:58:19 ago on Sat 31 Oct 2020 04:06:13 PM EET.
Dependencies resolved.
================================================================================
 Package                   Arch        Version               Repository    Size
================================================================================
Upgrading:
 dnf                       noarch      4.4.0-3.fc33          updates      445 k
 dnf-data                  noarch      4.4.0-3.fc33          updates       46 k
 libdnf                    x86_64      0.54.2-3.fc33         updates      604 k
 php-symfony-polyfill      noarch      1.19.0-1.fc33         updates       57 k
 python3-dnf               noarch      4.4.0-3.fc33          updates      410 k
 python3-hawkey            x86_64      0.54.2-3.fc33         updates      112 k
 python3-libdnf            x86_64      0.54.2-3.fc33         updates      775 k
 unixODBC                  x86_64      2.3.9-1.fc33          updates      460 k
 yum                       noarch      4.4.0-3.fc33          updates       43 k

Transaction Summary
================================================================================
Upgrade  9 Packages

Total download size: 2.9 M
Is this ok [y/N]: y
...
Upgraded:
  dnf-4.4.0-3.fc33.noarch             dnf-data-4.4.0-3.fc33.noarch             
  libdnf-0.54.2-3.fc33.x86_64         php-symfony-polyfill-1.19.0-1.fc33.noarch
  python3-dnf-4.4.0-3.fc33.noarch     python3-hawkey-0.54.2-3.fc33.x86_64      
  python3-libdnf-0.54.2-3.fc33.x86_64 unixODBC-2.3.9-1.fc33.x86_64             
  yum-4.4.0-3.fc33.noarch            

Complete!
[root@desk mythcat]# uname -a
Linux desk 5.8.16-300.fc33.x86_64 #1 SMP Mon Oct 19 13:18:33 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux

A job very well done by Fedora team.

Fedora 32 : Can be better? part 016.

Today I tested the Unity 3D version 2020 on Linux Fedora 32.
Maybe it would be better to integrate Unity 3D or Unity Hub in Fedora repo just like other useful software like Blender 3D, GIMP.
It will improve the user experience and attract new users and developers for this distro.
I download the AppImage from Unity website and I run with these commands:

[mythcat@desk Downloads]$ chmod a+x UnityHub.AppImage 
[mythcat@desk Downloads]$ ./UnityHub.AppImage 
r: 0
License accepted
...

Fedora 32 : About positive and negative lookahead with Bash commands.

Today I will talk about something more complex in Linux commands called: positive and negative lookahead.
This solution can be found in several programming languages including Bash
The lookahead process is part of regular expressions.
The lookahead process looks ahead in the string and sees if it matches the given pattern, but then disregard it and move on.
It is very useful when we want to go through the strings.
The lookahead process can be both positive and negative depending on the purpose.
Negative lookahead is indispensable if you want to match something not followed by something else and looks like this:

q(?!s).

The string is the question q is analyzed and if it does not match and is not followed by s returns the result.
The positive lookahead it works the same way only now it is parsed if it corresponds to s.
The positive lookahead looks like this:

q(?=s)

Let's look at a simple example of detecting the PAE option for the processor.
We can use this command but we will find a lot of information ...

[root@desk mythcat]# cat /proc/cpuinfo
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 58
model name	: Intel(R) Celeron(R) CPU G1620 @ 2.70GHz
stepping	: 9
...

In some cases, the resulting information can be taken using pipe and grep but they will be increasingly fragmented.
I will use the same command cpuinfo and we will look for the pae information in the flags.
All CPU flags can be found here.
Let's prove with internal lookahead to find the pae flag.

[root@desk mythcat]# cat /proc/cpuinfo | grep -oP '(?='pae')...' 
pae
pae

This result gives me additional information, namely that there are two cores.
Do you have a question?

Fedora 32 : Visual Code and C# on Fedora distro.

Today I will show you how to use Visual Code with C#.

sudo rpm --import https://packages.microsoft.com/keys/microsoft.asc
sudo sh -c 'echo -e "[code]\nname=Visual Studio Code\nbaseurl=https://packages.microsoft.com/yumrepos/
vscode\nenabled=1\ngpgcheck=1\ngpgkey=https://packages.microsoft.com/keys/microsoft.asc" > 
/etc/yum.repos.d/vscode.repo'

Then use dnf to check and install this editor.

#dnf check-update
#dnf install code

Use Extensions button or Ctrl+Shift+X keys to open in the left side area and intall the C# extension from Microsoft by pressing the Install button, see:

Created a folder named CSharpProjects and using the linux terminal execute the following command:

[mythcat@desk CSharpProjects]$ dotnet new mvc -au None -o aspnetapp
The template "ASP.NET Core Web App (Model-View-Controller)" was created successfully.
This template contains technologies from parties other than Microsoft, 
see https://aka.ms/aspnetcore/3.1-third-party-notices for details.

Processing post-creation actions...
Running 'dotnet restore' on aspnetapp/aspnetapp.csproj...
  Restore completed in 112.76 ms for /home/mythcat/CSharpProjects/aspnetapp/aspnetapp.csproj.

Restore succeeded.

[mythcat@desk CSharpProjects]$ cd aspnetapp/
[mythcat@desk aspnetapp]$ code .

This command will open the Visual Code. At this point, in the aspnetapp folder is an ASP.NET project open in Visual Code. You can run this project with command:

[mythcat@desk aspnetapp]$ dotnet run
warn: Microsoft.AspNetCore.DataProtection.KeyManagement.XmlKeyManager[35]
      No XML encryptor configured. Key {4c284989-9a5d-4ea7-89e2-a383828fd7ab} may be persisted 
      to storage in unencrypted form.
info: Microsoft.Hosting.Lifetime[0]
      Now listening on: https://localhost:5001
info: Microsoft.Hosting.Lifetime[0]
      Now listening on: http://localhost:5000
info: Microsoft.Hosting.Lifetime[0]
      Application started. Press Ctrl+C to shut down.
info: Microsoft.Hosting.Lifetime[0]
      Hosting environment: Development
info: Microsoft.Hosting.Lifetime[0]
      Content root path: /home/mythcat/CSharpProjects/aspnetapp

You can open the https://localhost:5001/ and see the default Welcome page from ASP.NET.

Fedora 32 : Create games with Phaser Editor 2D.

Today I install Phaser Editor 2D on Fedora 32, you can download it from the official website. I create an account and I download the archive for Linux. After unarchive I used very simple:

[mythcat@desk ~]$ cd PhaserEditor2D/
[mythcat@desk PhaserEditor2D]$ ls
editor  PhaserEditor2D  README.TXT  templates
[mythcat@desk PhaserEditor2D]$ ./PhaserEditor2D 
Phaser Editor 2D - v3.7.1

=> Running in Free mode (only 70 files per project allowed)
=> Purchase a license: https://gum.co/phasereditor

2020/10/03 16:17:51 Loading workspace at /home/mythcat/PhaserEditor2D_Projects
2020/10/03 16:17:51 Listening at http://127.0.0.1:1959/editor

Play IDE online : https://play.phasereditor2d.com/
Documentation   : https://help.phasereditor2d.com/v3
File bugs/ideas : https://github.com/PhaserEditor2D/PhaserEditor2D-v3/
Keep in contact : https://twitter.com/PhaserEditor2D

=> Open the web browser at http://127.0.0.1:1959/editor

2020/10/03 16:17:52 No updates available.

Phaser Editor 2D is a commercial IDE to develop video-games. It is delivered as an offline product and users can run it for free (with certain limitations) or can purchase a license key to unlock all features. Phaser Editor 2D version 3, the latest, is a complete new software based on web technologies. So we created Play Phaser Editor 2D, a small service to allow Phaser Editor 2D license owners, to run the editor and create small projects in the cloud. However, in the future, we will provide a different cloud service with options for storage, collaboration, publishing, integration with other services and payment. These are the Play Phaser Editor 2D available plans: Free Plan and Premium Plan About Free Plan: Running the FREE PLAN 0B/50MB of storage is used 59 days before expiration date The Premium Plan comes with these options:

• One Year License - 30$ Valid for one year after the purchase. Phaser Editor 2D Team email support. Write to developers@phasereditor2d.com. The option to refund in the first month after the purchase.
• Two Years License - 45$ Valid for two years after the purchase. Phaser Editor 2D Team email support. Write to developers@phasereditor2d.com. The option to refund in the first month after the purchase.
• Lifetime License - 75$ Never expires. Phaser Editor 2D Team email support. Write to developers@phasereditor2d.com. The option to refund in the first month after the purchase.
• Two Years Team License - 125$ 5 developers allowed. Valid for two years. Phaser Editor 2D Team email support. Write to developers@phasereditor2d.com. The option to refund in the first month after the purchase.

This is a video tutorial from official youtube channel:

Fedora 32 : Can be better? part 015.

In the evening I can spend my time with Fedora 32.

In the last few days I studied GTK # a bit.

I thought it would be useful for Linux users and those who use the language of the FASM assembler to have an editor.

Tonight I created this simple project this simple project named fasm_editor.

The objectives of this project are:

• creating a functional editor;
• implementation of running and compilation requirements;
• settings specific to the Linux operating system;

I believe that this way Fedora Linux can be improved and become better.